PEEPLNK

============================================================
CCRID Product ProductLevel2 Title
============================================================
2951885 ALLEGROX 3D_CANVAS Support for 3D view manipulation using keyboard and trackpad
2959393 ALLEGROX 3D_CANVAS Include dim and desaturation mode selection and highlighting in 3DX
2983725 ALLEGROX 3D_CANVAS Invoking 3DX Canvas crashes Allegro PCB Editor
2987523 ALLEGROX 3D_CANVAS Bend is not displayed correctly in 3D Canvas
2940934 ALLEGROX CROSS_SECTION Allegro PCB Editor crashes when deleting stackup or importing tcfx file
2772100 ALLEGROX DATABASE Max subclasses reached: Error on creating customized subclass under Board GEOMETRY class
2802120 ALLEGROX DATABASE Cannot use trace-targeting commands, such as route, slide, or delay tune, in corrupted database.
2840660 ALLEGROX DATABASE Clines to pin spacing not detected
2918537 ALLEGROX DATABASE Import netlist adds incorrect ALT_SYMBOL property to symbol
2974010 ALLEGROX DATABASE Reading in schematic in a MDD file does not change footprint
2976733 ALLEGROX DATABASE Allegro PCB Editor board uprev from release 10 to release 17.4-2019 fails
2745159 ALLEGROX DFA DFA constraint table unable to differentiate "side" or "end" when its DFA boundary is not rectangular
2794681 ALLEGROX DFA Issue with Skip via layer count: DRC show element layer count is different
2753127 ALLEGROX DFM Wrongly displayed DRC for Micro Via Hole to Micro Via Hole
2937983 ALLEGROX DFM DFF Silkscreen to Soldermask check issue: DRC errors related to class/subclass not added under Group members
2941495 ALLEGROX DFM Allegro PCB Editor crashes when adding GND shape with on-line DFM checks enabled
2957011 ALLEGROX DFM Shape to pins paste mask shape DRCs but checking set up only for shape-to-shape
2811141 ALLEGROX DRC_CONSTR Updating Dynamic Shapes taking more than five minutes
2916739 ALLEGROX DRC_CONSTR Extremely slow routing and via placement in Allegro X PCB Editor due to Acid Trap Angle Check
2928775 ALLEGROX DRC_CONSTR Allegro PCB Editor crashes after running DRC update/update shape
2949559 ALLEGROX DRC_CONSTR Diff Pair Driver Pin assumed by DRC System should be marked with Diff Pair Driver Triangles
2949561 ALLEGROX DRC_CONSTR DRC Error marker details with "Static Phase at Vias option" enabled need to indicate when Phase is measured from Via
2973643 ALLEGROX DRC_CONSTR Extremely slow routing, and via placement in Allegro X layout editor due to Acid Trap Angle Check
2987780 ALLEGROX DRC_CONSTR Crash deleting Cline Segs
2729041 ALLEGROX DXF Export dxf to have mirror capability
2620618 ALLEGROX EDIT_ETCH Gather point for rotated pads needs update
2662420 ALLEGROX EDIT_ETCH Diff Pair Gather issues with Add Connect and Auto-Interactive Breakout returning DRCs after breakout
2962529 ALLEGROX EDIT_ETCH Bubble causing uncoupling in diff-pair clines created with Taper-Aware Transition
3022922 ALLEGROX EDIT_ETCH Delay Tune to create bumps using space more efficiently
2923420 ALLEGROX EXTRACT Support for etch factor in extracta output
2841905 ALLEGROX GRAPHICS Aurora "Show Vectors" issue in IR Drop workflow.
2912490 ALLEGROX GRAPHICS Vector current view in IDA does not work when gpu is enabled
2922694 ALLEGROX GRAPHICS Capture canvas image feature enhancement
2933049 ALLEGROX GRAPHICS Improve contrast of hyperlink text color in dark theme
2938307 ALLEGROX GRAPHICS Refresh required after undo when pasting uvia to create stacked uvia
2949508 ALLEGROX GRAPHICS Assigning Custom Color removed Diff Pair Driver Pin triangles on GPU Canvas (Timing Vision, Custom Color Net/Pin)
2952503 ALLEGROX GRAPHICS Add User Preferences display controls for Diff Pair Driver Pin (triangle) when enabled with GPU Canvas active
2959321 ALLEGROX GRAPHICS Drill Labels for Slotted Via Padstacks are too large when the slot is rotated
2968849 ALLEGROX GRAPHICS Drill figures missing with NC Legend - By Layer option
2854921 ALLEGROX IN_DESIGN_ANA IDA flow should support IRCX
2856169 ALLEGROX IN_DESIGN_ANA APD/XtractIM integration to support more package configurations
2939000 ALLEGROX IN_DESIGN_ANA W-element extraction support for designs that do not contain plane layers in cross section
2940716 ALLEGROX IN_DESIGN_ANA Resistance is not being updated with the model value in AMM
2951037 ALLEGROX IN_DESIGN_ANA IDA Impedance workflow co-planer ground handling
2957603 ALLEGROX IN_DESIGN_ANA Impedance Vision does not highlight nets
2960790 ALLEGROX IN_DESIGN_ANA Aurora crashes while running IR Drop Analysis
2966484 ALLEGROX IN_DESIGN_ANA Allegro Impedance Workflow - coplanar trace simulation option checkbox not functioning.
2988388 ALLEGROX IN_DESIGN_ANA Unable to apply PowerTree file in IR Drop workflow and getting error (SPMHIA-8017)
2988969 ALLEGROX IN_DESIGN_ANA IR Drop Vision not showing layers with special character in name
2941362 ALLEGROX IPC IPC2581 import fails in Allegro PCB Editor
2943454 ALLEGROX IPC The IPC2581 output data using the CMD condition with the Layer Mapping File.
2944559 ALLEGROX IPC IPC2581 full import fails in Allegro PCB Editor
2966013 ALLEGROX MANUFACTURING NCDrill Legend with Actual Drill separates the Finished Hole/Drilled Hole from their associated Tolerances
2309927 ALLEGROX MCAD_COLLAB Ability to filter Zones in IDX Export
2737577 ALLEGROX MCAD_COLLAB Cannot import IDX files containing zones into third-party software
2884080 ALLEGROX MCAD_COLLAB Sharp points on shape edges in IDX data causes shape to intersect with itself, fails to be created
2953986 ALLEGROX MCAD_COLLAB IDF Import OTHER_OUTLINE default subclass has suffix BOT instead of BOTTOM
2960083 ALLEGROX MULTI_USER Symphony server stops after CM update
2866669 ALLEGROX NC Ability to override fixedfigureheight in drill template for slots
2975502 ALLEGROX NC Export NC drill "By Layer" unexpected .drl backup files contain missing drill data
3007420 ALLEGROX ODB Import ODB++ missing some clines and arcs
2897795 ALLEGROX OTHER Cadence SPB Switch Release support for correct SIGRITY_EDA_DIR
2929105 ALLEGROX OTHER Products cannot be started after removing Microsoft Visual C++ Redistributable 2012
2992330 ALLEGROX PAD_EDITOR Padstack Editor should not allow Finished Hole Size to be set to 0 once it has been changed to a positive number
2950477 ALLEGROX DescriptionTING Display texts and print do not show the same dimensions
2954776 ALLEGROX DescriptionTING Scale issue with Description in Allegro PCB Editor in release 23.1
2968233 ALLEGROX DescriptionTING Incorrect dimensions while printing board with 1:1 scale
2970489 ALLEGROX DescriptionTING Description is not respecting scaling factor 1.0
2988317 ALLEGROX DescriptionTING No effect when the Scaling factor set to 1:1
2926159 ALLEGROX REPORTS Exporting multiple reports appends to existing report without replacing it as single report does.
2728246 ALLEGROX SHAPE Static shape same net DRC cannot be removed automatically
2853300 ALLEGROX SHAPE Dynamic shape not honoring settings in dynamic shape params
2900686 ALLEGROX SHAPE Small gap between the RKO and the voided shape
2918701 ALLEGROX SHAPE Very thin or narrow shapes not suppressed based on given minimum aperture gap width
2933517 ALLEGROX SHAPE Extra spoke generated without DRC
2945802 ALLEGROX SHAPE Inconsistent Dynamic Copper Shape (GND) causing Netshorts and failing to create "Line/Via to shape" voids
2971884 ALLEGROX SHAPE Minimum aperture for gap width is not followed
2996757 ALLEGROX SHAPE Incorporate release 22.1 HotFix 004 shape behavior in Dyn_Shape_Legacy for release 22.1 HotFix 009
2932332 ALLEGROX SRM System manager is very slow.
2756313 ALLEGROX UI_FORMS Add search in the Design Workflow panel
2853278 ALLEGROX UI_FORMS Search window in Design Workflow
2933740 ALLEGROX UI_GENERAL User Preferences: Align Guides in the Summary description window has text issue with special characters
2942860 ALLEGROX UI_GENERAL Allegro PCB Editor is failing to add customized commands to the toolbar.
2670725 ALLEGROX ZONES Add warning or a way of handling fixed fillets when mapping a zone
2925372 ALLEGROX ZONES Design has a zone area that cannot be created
2803027 ALLEGRO_LIB_CRT CORE LC Server support for MySQL 8.0
2909196 ALLEGRO_LIB_CRT CORE Preview not available for imported footprints generated using LC in release 22.1
2923645 ALLEGRO_LIB_CRT CORE Cannot open Allegro ECAD-MCAD Library Creator in Windows 11
2917655 ALLEGRO_VIEWER OTHER Allegro Viewer missing some layers visible in Allegro PCB Editor
2912636 APD 3D_CANVAS Application stops responding when opening 3D Canvas for designs with non-standard wire bond functions
2942438 APD DATABASE Unable to create artwork file due to incorrect dbdoctor error
1813998 APD DEGASSING Enhance the 'degas_no_void' property to support route keepout shapes
2453011 APD DEGASSING Enable the 'degas_no_void' property for keepout shapes
2538943 APD DEGASSING Degassing command is considering the area after a slit as void
2744538 APD DEGASSING Option to add slots while degassing
2828839 APD DEGASSING Move advanced degassing holes
2831013 APD DEGASSING Enhancement to interactively move advanced degassing holes, and API SKILL for the same
2850199 APD DEGASSING Add shape status count report to layer based degas/metal fill UI to see which shapes are in deferred state
2850391 APD DEGASSING Degassing parameters tab in the Shape Parameters dialog box enabled in APD by default
2912665 APD DEGASSING Missing degassing voids on adjacent layers
2965075 APD DEGASSING AREF degassing makes static shapes look dynamic
2976286 APD DEGASSING Advanced degassing pattern needs the stagger option to adhere to the void separation field values
2980371 APD DEGASSING Degassing Hole Configuration
3009743 APD DEGASSING Degassing engine to follow clines angle when placing degassing holes
2928707 APD DFA Minimum shape width check reports false violations in HotFix 008 of release 22.1
2949507 APD DIE_EDITOR Unshrinking a die in APD does not change die size or pin locations
2672833 APD DIE_STACK_EDI APD release 17.4 is slow to activate 'show element', 'xsection', and Constraint Manager commands
2894457 APD DIE_STACK_EDI 'The 'show element' command is slow to respond
2942818 APD DIE_STACK_EDI APD becomes unresponsive when show element command is invoked.
2966631 APD DIE_STACK_EDI Trying to open Die Stack Editor crashes database
2874571 APD DRC_CONSTRAIN Acute Angle Fix causes false Same Net uVia-uVia DRC
2901352 APD DRC_CONSTRAIN Constraint Manager - TECHPATH variable not working
2958469 APD DRC_CONSTRAIN Make colon-as-header-divider option with a switch.
2958474 APD DRC_CONSTRAIN Remove the superfluous external and externally determined violation levels in the DRC Browser.
2082454 APD EDIT_ETCH Update for differential pairs crossing regions
2608828 APD EDIT_ETCH Enhancement to differential pair routing and joining
2897603 APD EDIT_ETCH Differential pair routing not following the Region rules
2943834 APD EDIT_ETCH Tapers are missing when spacing is equal on both sides of region.
2585367 APD ETCH_BACK Unexpected behavior of etch-back traces and masks under specific circumstances
2784357 APD GRAPHICS Shape highlight issue with GPU enabled
2926794 APD GRAPHICS GPU: Temp Highlight of shapes shows fill as solid temp highlight color with no opacity
3010490 APD IN_DESIGN_ANA integrate polygon shape cutting simplification process to use in IME and avoid meshing problems
3021158 APD IN_DESIGN_ANA IDA needs to support APD-Allegro scripting to run simulations in no_graphics mode
2960766 APD ODB ODB export & import results in symbol with duplicate pins
2921933 APD ORBITIO_IF Enhance performance of 'allegro2orbit' command, reduced comments during export metal
2967939 APD ORBITIO_IF orbit2allegro missing substrate geometry, component geometry, and embedded geometry
2972976 APD ORBITIO_IF Import Integrity 3D-IC: crash on uRDL design
3032878 APD ORBITIO_IF On importing oio into APD, the PIN NAME becomes the PIN NUMBER.
2920737 APD OTHER When switching SPB version in Cadence Switch Release, the SIGRITY_EDA_DIR value changes
2929548 APD OTHER Enable the 'unlock symbol' command in the Symbol Edit application mode
2933703 APD OTHER Customer gets "GDS ✅File Name contains illegal char ' '. please re-enter" error during PVS stream file setup
2933752 APD OTHER Update Pin Names checkbox is required in Netlist-in Wizard.
2936968 APD OTHER Update Pin Names checkbox is required in Netlist-in Wizard.
2972828 APD OTHER Allegro PCB Editor/APD on Linux: Not writing allegro.ini file to pcbenv on exit and not remembering tool options
3010499 APD OTHER need polygon cut simplification option to limit downstream simulation meshing problems with current polygon cut
2937426 APD DescriptionTING Description preview settings (margins or page orientation) does not record anything to scripts.
2937430 APD DescriptionTING Description margins are not applied to resulting PDF.
2982426 APD POWER_DELIVER Rail Generator does not allow vias to be placed correctly in the Rail patterns
3027983 APD PULSE Pulse menu options are not visible with ISR 4 with Sip Layout Bundle License
2944516 APD REPORTS Require an option to ignore No Connect nets from un-routed connections in status window.
2910417 APD SHAPE Update the 'void adjacent layer shapes' command to support shape objects
2978944 APD SHAPE Shape-Line Short/Spacing issue with running PG generator
2854470 APD STREAM_IF Enable the stream_drill_class variable by default
2808694 APD UI_GENERAL Command prompt in APD loses focus if you go to another program
2944393 APD UI_GENERAL Progress meter shows 100% complete although the task is still processing.
2927432 APD VIA_STRUCTURE Unable to place a structure in a specific database
2940681 APD VIA_STRUCTURE Via structures path (padpath) does not allow spaces in directory name.
2965356 APD VIA_STRUCTURE Via structure cannot be found if there is a space character in the padpath
2968854 APD VIA_STRUCTURE Structure import creating multiple padstacks for vias instead of pointing to one padstack
2929255 APD WLP Shielding Generator update to create a shielding shape based on trace-based shielding result from ASR
2931307 APD WLP Import Techfile: Incorrect support type in rule mapping report
2935533 APD WLP Performance issues observed while creating shielding shapes in ASR.
2940294 APD WLP Parasoft issues observed in Advanced Shielding.
2941747 APD WLP Advanced Shielding: Missing shielding traces between close signal traces
2949115 APD WLP Fix acute angle issue of advanced shielding.
2949418 APD WLP Edge connector not aligning or rotating pins with trace angle
2951404 APD WLP Fix false alarm DRCs of package integrity check.
2956253 APD WLP Allow edge connector feature to accept negative offset
2956585 APD WLP Advanced shielding slows down or stops responding for designs with many vias.
2960047 APD WLP Shielding shapes should have lower shape priority than pre-route shapes in advanced shielding.
2961384 APD WLP Advanced Shielding: Shielding parameter should be loaded on UI when shape is selected
2964251 APD WLP Advanced Shielding: Slow performance while closing for large design
2966304 APD WLP Bugs related foundry tech file and Allegro info techfile: Missing pad stack via info
2971110 APD WLP Import Techfile: Support offset via table
2973025 APD WLP Advanced Shielding: Missing shielding traces for signal traces with lots of turns
2974691 APD WLP Import Techfile: Support same net spacing table
2985614 APD WLP Package Integrity Check: Straight lines that cross specific region
2985616 APD WLP Import Techfile: Default via spacing should be applied to region constraint set
2985620 APD WLP Import Techfile: Support multi-via structure
2985625 APD WLP Import Techfile: Translate via name for max offset via table
2988644 APD WLP Import TechFile: SMD Pin to Micro Via spacing value needs correction
3001116 ASI_PI GUI Aurora crashes when launching Power Feasibility Editor
2961554 CAPTURE FILEMANAGER Delete project from File Manager in OrCAD X Capture
1241564 CAPTURE GEN_BOM Character limit for combined property string in BOM
1537915 CAPTURE GEN_BOM Error (ORCAP-1799) displayed stating length of value exceeds 255 characters
1879165 CAPTURE GEN_BOM Enhancement to increase the BOM character limit for each row
483463 CAPTURE GEN_BOM Increase the character limit in Capture BOM
565351 CAPTURE GEN_BOM Increase the character limit in Capture BOM
649233 CAPTURE GEN_BOM Increase the character limit in Capture BOM
919666 CAPTURE GEN_BOM Increase the character limit in OrCAD X Capture BOM
2965744 CAPTURE OTHER Opening design takes too long if OrCAD X Capture was closed when many pages were open
2965756 CAPTURE OTHER Command window pops up in OrCAD X Capture
2965764 CAPTURE OTHER Login dialog should not come up if network or Cloud not available
2969200 CAPTURE OTHER Problem in allegro.cfg flow: CIS annotated PART_NUMBER but Cloud annotates PART NUMBER
2969683 CAPTURE OTHER Registry value not created after installation of Base and Hotfix
2945762 CAPTURE SCHEMATIC_EDI OrCAD X Capture crashes while placing hierarchical blocks
2947969 CAPTURE SCHEMATIC_EDI OrCAD X Capture crashes
2909012 CAPTURE WORKSPACECONF Unable to translate some menus to Japanese
2913168 CAPTURE WORKSPACECONF Garbled characters under the CLOUD SYNC icon in Japanese language system
2932319 CLOUD_INFRA STARTPAGE Allegro PCB Editor is accessing an external URL
2935681 CLOUD_INFRA STARTPAGE Warning because Allegro PCB Editor is accessing external URL
2990932 CM OTHER isr.txt file returns the wrong value
2897987 CONCEPT_HDL AWR_TRANSLATO con2ul_cmd should translate NC_PINS from body section to compDefPins with no funcDefPins
2899136 CONCEPT_HDL AWR_TRANSLATO con2ul_cmd enhancement needed for bussed terminals
2901285 CONCEPT_HDL AWR_TRANSLATO COMPDEF_FUNCDEF_PINNAME and COMPDEF_FUNCDEF properties not created on pins with special characters
2936180 CONCEPT_HDL CORE Packager-XL failure and packaging error on running Export Physical
2990687 CONCEPT_HDL CORE The 'nconcepthdl' script command takes a long time to complete
2948919 CONSTRAINT_MGR ANALYSIS Require the granular ability to activate static phase checks at vias
2285944 CONSTRAINT_MGR OTHER Need the ability to push changes in site-level custom constraints properties into design
2872552 CONSTRAINT_MGR OTHER Import package to package spacing in Constraint Manager using Allegro SKILL function
2929642 CONSTRAINT_MGR OTHER Calling Allegro SKILL function axlOSExit() crashes PCB Editor if Constraint Manager is open
2941100 CONSTRAINT_MGR OTHER Adjacent void spacing check for return path results in an error
2993105 CONSTRAINT_MGR OTHER Crash with IPC SKILL calls
2874879 CONSTRAINT_MGR SYSCAP Cannot backannotate differential pairs
2958158 CONSTRAINT_MGR SYSCAP Prompts for saving changes even though no edits done
2911147 GRE CORE Auto Connect command not routing the boards when routing with 'One Layer Only' option
2950812 INSTALLATION BASE Unable to install or uninstall with my login account because it has ! in the username
3012536 INSTALLATION BASE Update "Single User License" in Input License Details dialog
2889436 INSTALLATION OTHER Installation Host Name field not large enough
2966444 LIVEDOC CANVAS_OBJECT Copy/Paste offset when placing text or shapes
2961079 LIVEDOC EXPORT OrCAD X Presto crashes when export PDF from LiveDoc
2996037 LIVEDOC PROPERTIES Page Name in Title Block not available in OrCAD X Presto LiveDoc
2918933 OPTIMALITY TOPXP Topology Workbench/Optimality flow to support string type parameter
2932037 OPTIMALITY TOPXP Incorrect parameter values displayed in Optimality UI of Topology Workbench
2955567 ORCADX 3D_CANVAS Pads are not getting suppressed in 3DX Canvas
2895748 ORCADX LAYOUT_EDITOR Silkscreen visibility is activated on its own while going from 2D to 3D
2910532 ORCADX LAYOUT_EDITOR OrCAD X Presto and System Capture share the same desktop icon
2925932 ORCADX LAYOUT_EDITOR Color view not saved
2959473 ORCADX MANUFACTURING Artwork film option for Design Outline to be added to Presto Export list > Fabrication_Gerber
2914295 ORCADX OTHER OrCAD X Presto crashes on opening or creating a board file
2914307 ORCADX OTHER OrCAD X Presto crashes when laptop is connected to the docking station
2925981 ORCADX OTHER OrCAD X Presto crashes when opening a board or footprint
2929938 ORCADX OTHER If 'allegro_etch_length_on' set in the project, generates 'Command not found: _et' error when routing in OrCAD X Presto
2933187 ORCADX OTHER Dual screens cause crashes when creating or opening a board file
2990978 ORCADX SYMPHONY_UX Symphony panel is always open in OrCAD X Presto
2958309 ORCADX UI Minimum web option for void control is not working for cross-hatch shapes
2911906 PCB_LIBRARIAN PML_CORE Librarians should not be able to delete libraries.
2897803 PCB_LIBRARIAN PML_GRAPHICAL Make a visible name distinction between physical and graphical view
2907632 PCB_LIBRARIAN SYMBOL_EDITOR Attribute deletion in System Capture is inconvenient
2852001 PCB_LIBRARIAN SYMBOL_EDITOR Pointer indicates incorrect action at the edge of shape
1621573 PSPICE PROBE Non-Windows line break encoding support required for CSV import function
2921872 PULSE ADHOC System Capture is taking a long time to launch
2931456 PULSE ADHOC System Capture stops responding when started
2867723 PULSE AUTHORIZATION Nested groups are not working properly with default group permissions
2916603 PULSE CORE Pulse server in Maintenance mode because of 'Pulse Datamart' and 'Pulse Block Storage' internal errors
2860787 PULSE DASHBOARD Medic testcase generation failing (Error: C:/Windows/TEMP/history does not exist)
2943671 PULSE DASHBOARD Enhancement request: Indicate a star next to the default footprint name in the parameter/attribute column and preview
2967930 PULSE PML_CORE Make comment mandatory when checking in part
2957957 PULSE R2PLM-LIBSYNC Windchill attributes with blank values cannot be overwritten to EDM in LibSync
2844225 PULSE R2PLM-TC Need ability to add mechanical parts without part reference in PFM output for PLM system BOM
2875049 PULSE R2PLM-TC Enhancement Request - Publish for Manufacturing to create variant assembly part objects in Teamcenter with publish
2875460 PULSE R2PLM-TC Updating BOM items causing duplication in Teamcenter if previously published without using Publish for Manufacturing
2926061 PULSE R2PLM-TC Publish for Manufacturing does not publish mechanical parts added in variant Live BOM for Teamcenter connector
2958935 PULSE R2PLM-TC Release 23.1, HotFix 003: Reference designator not shown in the PLM system when using PFM for variant BOM
2787564 PULSE R2PLM-WC Enable expand and collapse of the Utilities entries
2942576 PULSE R2PLM-WC Publish for Manufacturing displays error PFM-1073 when there is a hyphen in the System Capture project name.
2945625 PULSE SERVER Client Pulse Manager shows 'No node is open' message in release 23.1
2947130 PULSE SERVER Issue with System Capture in release 23.1: Client Pulse Manager shows 'No node is open' message
2951525 PULSE SERVER Data Node information not visible in Pulse Manager when non-English locale machines connect to the server
2964158 PULSE SERVER Nodes list is not displayed in the Pulse Manager web page in release 23.1
2907310 PULSE UNIFIED_SEARC Selecting symbol version needs to display all available symbols in a drop-down
2943561 PULSE UNIFIED_SEARC Pulse Dashboard and System Capture: Errors related to Unified Search (SPPSUN-26) and configuration data (SPDWSRV-603)
2869779 PULSE VERSION_ON_SA Project owner unable to remove lock from project
2874828 PULSE VERSION_ON_SA Project owner unable to unlock project after another user has selected 'Commit with Keep project checked out' option
2882873 PULSE VERSION_ON_SA Owner is unable to unlock design locked by another user
2938261 RF_PCB LIBRARY Using Package Symbol Wizard to create RF symbols needs an option to update the current project library
2873320 SIP_FLOW SIP_LAYOUT Need shape selection and deferred thieving
2929719 SYSTEM_CAPTURE ADD_COMPONENT System Capture crashes when adding NC symbol to design with NC bus
2985313 SYSTEM_CAPTURE ADHOC Query the block versions from within the top-level design
2908407 SYSTEM_CAPTURE BLKDIAGRAM_AU Align center does not work on auto shapes
2929723 SYSTEM_CAPTURE BOM System Capture generated a blank Base BOM report after indicating Generate BOM was successful
2936570 SYSTEM_CAPTURE BOM System Capture Create BOM fails with errors about pstxnet.dat file
2946549 SYSTEM_CAPTURE BOM Generate BOM UI not displaying
2971915 SYSTEM_CAPTURE BOM BOM HDL Variant issue in System Capture if design name has dash
2992961 SYSTEM_CAPTURE BOM Variant assigned to block but only base shown in BOM
2993276 SYSTEM_CAPTURE BOM Unable to include the mechanical parts in mechanical parts PTF file in System Capture BOM callouts
2892293 SYSTEM_CAPTURE CAPTURE_IMPOR Option to import board file while migrating Capture design (.DSN)
2933543 SYSTEM_CAPTURE CAPTURE_IMPOR OrCAD X Capture design gets imported into System Capture without any parts
2934635 SYSTEM_CAPTURE CAPTURE_LIB_I cap2sda generating incorrect pin number justification values
2629630 SYSTEM_CAPTURE CAPTURE_SUPPO Port direction incorrect in OrCAD X Capture-based designs
2857410 SYSTEM_CAPTURE CONSTRAINT_MA Net loses constraints when net name is deleted
2909781 SYSTEM_CAPTURE CONSTRAINT_MA XNets are not created for the different versions of a symbol
2919176 SYSTEM_CAPTURE CONSTRAINT_MA Need Tcl API to identify XNet state of design
2989057 SYSTEM_CAPTURE CONSTRAINT_MA System Capture crashes when cross-probing from Constraint Manager
2996656 SYSTEM_CAPTURE CONSTRAINT_MA Create xnet through component does not work correctly if pin name has a space
2983015 SYSTEM_CAPTURE DELETE Unexpected crash of System Capture
2992831 SYSTEM_CAPTURE DELETE System Capture crashes while deleting a net name in the attached design
2980831 SYSTEM_CAPTURE DRC System Capture crashes when trying to run custom design audit rule
2933704 SYSTEM_CAPTURE EDIT_SEARCHRE Updates to a bus or bus bits using 'Edit Externally' option are not listed in the external_editor_log.
2926998 SYSTEM_CAPTURE EXPORT_PCB Error (CPCB-78) on Export to Layout: Export to PCB layout has completed but the board file has errors.
2933559 SYSTEM_CAPTURE FIND_REPLACE Replacing nets using Find and Replace automatically saves the design without prompting the user
2960811 SYSTEM_CAPTURE FIND_REPLACE Changing reference designator using 'Edit Externally' changes reference designator location
3000485 SYSTEM_CAPTURE HSS_SYMBOLEDI Signal names are not updated when using split symbols
2954965 SYSTEM_CAPTURE IMPORT_BLOCK System Capture block cannot be updated
2959290 SYSTEM_CAPTURE IMPORT_BLOCK Need a simple way to convert System Capture read-only blocks from local disk import to Pulse managed
2893177 SYSTEM_CAPTURE IMPORT_DEHDL_ Some texts and shapes distorted after DE-HDL to System Capture migration
2944408 SYSTEM_CAPTURE IMPORT_DEHDL_ Global nets disconnected when importing sheets from DE-HDL into System Capture
2992482 SYSTEM_CAPTURE IMPORT_DEHDL_ System Capture quits unexpectedly when migrating design from DE-HDL
2892599 SYSTEM_CAPTURE MENUS_AND_TOO Toolbar icons remain highlighted (blue) after command is completed
2985412 SYSTEM_CAPTURE MENUS_AND_TOO The custom menu button highlight is very faint and not clear
2938967 SYSTEM_CAPTURE MISCELLANEOUS Violation count is incorrect when user violations are used
2817834 SYSTEM_CAPTURE NAVLINKS Off-page symbols do not respect placeholders on navigation link updates or symbol moves
2922006 SYSTEM_CAPTURE NAVLINKS Navigation links position changes after closing and reopening a System Capture project
2936939 SYSTEM_CAPTURE NAVLINKS System Capture shows incorrect navigation links
2936975 SYSTEM_CAPTURE NAVLINKS Add error checking to the command navigation links
2894537 SYSTEM_CAPTURE NETGROUP Error causes entire content of project to be deleted
2908898 SYSTEM_CAPTURE NOTES Notes linked to block objects cannot be copied in an intuitive manner.
2916873 SYSTEM_CAPTURE NOTES Text box formatting lost on copying notes from one design to another
2950103 SYSTEM_CAPTURE OPEN_CLOSE_PR Escape key discards unsaved changes
2967902 SYSTEM_CAPTURE OPEN_CLOSE_PR Prompt the user for missing the cds.lib file from the project directory.
2707954 SYSTEM_CAPTURE PACKAGER User would like a GUI mechanism to toggle soft/hard RefDes
2717953 SYSTEM_CAPTURE PACKAGER Need GUI option to change a RefDes from fixed to changeable.
2751863 SYSTEM_CAPTURE PACKAGER System Capture: page number based RefDes assignment for hierarchical designs
2756311 SYSTEM_CAPTURE PACKAGER Need option to use Page Number for RefDes assignments in System Capture blocks
2767294 SYSTEM_CAPTURE PACKAGER 'Change RefDes' is not working on PSpice sources and manual change is giving incorrect violation.
2880054 SYSTEM_CAPTURE PACKAGER Block packaging option 'Offset' is not honoring zero padding applied in lower-level design
2910526 SYSTEM_CAPTURE PACKAGER Option to change a RefDes from user-defined to tool-defined
2949557 SYSTEM_CAPTURE PACKAGER Packaging fails for a part with multiple groups of PACK_SHORT property
2949886 SYSTEM_CAPTURE PACKAGER No component definition properties on schematic instance
2973451 SYSTEM_CAPTURE PACKAGER Auto-resolve reference designator conflict option not working as expected
2974268 SYSTEM_CAPTURE PACKAGER Component reference designators automatically change after schematic updates.
2976257 SYSTEM_CAPTURE PACKAGER Auto-resolve reference designator conflict option not working correctly
2540964 SYSTEM_CAPTURE PART_MANAGER In System Capture Part manager provide ability to navigate to selected part
2624158 SYSTEM_CAPTURE PART_MANAGER Popup command in Part Manager to inspect the components in the schematic before updating
2877842 SYSTEM_CAPTURE PART_MANAGER Cross Probe from Part Manager
2929704 SYSTEM_CAPTURE PART_MANAGER Part Manager unable to sync project parts defined within a hierarchal block and in a variant with library changes
2933744 SYSTEM_CAPTURE PART_MANAGER Part Manager update causes design corruption
2934596 SYSTEM_CAPTURE PART_MANAGER Part Manager is not updating all the properties and displays an error
2939671 SYSTEM_CAPTURE PART_MANAGER Part Manager notifies that variant preferred part needs an update, but does not update
2972865 SYSTEM_CAPTURE PART_MANAGER Part Manager issue when using 'read-only' directive
2998174 SYSTEM_CAPTURE PART_MANAGER Request a drop-down option to specify allowed footprints in Part Manager
2946501 SYSTEM_CAPTURE PERFORMANCE System Capture performance issue when refreshing a block
2946508 SYSTEM_CAPTURE PERFORMANCE System Capture performance issue when adding a new pin to a block
2946511 SYSTEM_CAPTURE PERFORMANCE System Capture performance issue during an undo operation
2952391 SYSTEM_CAPTURE PERFORMANCE Application is slow and stops responding
2749791 SYSTEM_CAPTURE REPLACE Reference designator changes on replacing a split part in System Capture.
2775804 SYSTEM_CAPTURE REPLACE Symbols changing refdes when replaced
2806443 SYSTEM_CAPTURE REPLACE Option to preserve reference designator upon doing Replace symbol
2918614 SYSTEM_CAPTURE REPLACE 'refreshSymbol' command changes the font size of symbol properties
2972367 SYSTEM_CAPTURE SCRIPTING Closing and then reopening project causes the connectivity server to be null
2640967 SYSTEM_CAPTURE SHORTCUTS Bind keys do not work the first time in System Capture
2978778 SYSTEM_CAPTURE SHORTCUTS System Capture release 23.1, hotfix 004: CTRL+N in does not create a new project.
2979396 SYSTEM_CAPTURE SHORTCUTS Preferences - Shortcuts has keyboard shortcuts in bold
2945151 SYSTEM_CAPTURE SMART_PDF Smart PDF does not print ellipses correctly.
2990975 SYSTEM_CAPTURE SYMBOL_CREATO System Capture Symbol Editor - duplicate icons for table view represent two different functions
2946498 SYSTEM_CAPTURE SYMBOL_GEN Position of some wires in DE-HDL design moved from original location after design migration to System Capture
2928233 SYSTEM_CAPTURE TABLE_OF_CONT Page border property should be used by TOC
2923334 SYSTEM_CAPTURE UNIFIED_SEARC "Press enter to search" covers textbox in Unified Search
2937990 SYSTEM_CAPTURE UNIFIED_SEARC Unified Search fails with particular alphanumeric Part Numbers
2947758 SYSTEM_CAPTURE UNIFIED_SEARC Part Number column in Unified Search is hidden when window is undocked and resized
2952108 SYSTEM_CAPTURE UNIFIED_SEARC In Unified Search, filtering parts by class always opens the first classification in expanded form
2896537 SYSTEM_CAPTURE VARIANT_MANAG System Capture Hierarchical Variants need to be implemented as functions
2899501 SYSTEM_CAPTURE VARIANT_MANAG Hierarchical Variants - Variant-specific property cannot be applied to hierarchical blocks
2939937 SYSTEM_CAPTURE VARIANT_MANAG Read the value of VAR_SYNC_ON_REFDES directive every time variant data is synchronized
2946514 SYSTEM_CAPTURE VARIANT_MANAG System Capture crashes when trying to reimport a block
2971891 SYSTEM_CAPTURE VARIANT_MANAG The popup option for zoom is not available in the Variant View mode
2993224 SYSTEM_CAPTURE VARIANT_MANAG Migrated DE-HDL design with hierarchical variants shows CPCB-284 and CGCAN-1023 errors in System Capture variants
2776391 SYSTEM_CAPTURE VERSION_ON_SA Assigning value to variant-specific property, RSTATE, causes Live BOM error
2827084 SYSTEM_CAPTURE VERSION_ON_SA When symbol is missing in design cache, autocommit works but manual commit does not
2905281 SYSTEM_CAPTURE WIRING Nets 12V and 3.3V are shorted during commit process
2964459 SYSTEM_CAPTURE WIRING Replace component causes net name to change in System Capture
2815584 SYSTEM_DESIGN SDE_EXPORT_SU Subsystems project cannot be exported when site.cpm sets user page border
2845557 SYSTEM_DESIGN SDE_REPORTS Tools - Generate System Design Report does not run
2733280 SYS_RELIABILITY AUDIT_RULES Waive the NC pin EAUDIT-9 and EAUDIT-39 Single Connection pins based on net name
2901876 SYS_RELIABILITY AUDIT_RULES Unconnected pin violation reported for pins with NC symbol
2916578 SYS_RELIABILITY AUDIT_RULES Unconnected pin violation reported for pins with NC symbol
2953233 SYS_RELIABILITY AUDIT_RULES Schematic audit shows EAUDIT-43 and 44, and 14 violations
2967256 SYS_RELIABILITY AUDIT_RULES Ignore a single-node net to be flagged in the report 'Single-Node Nets' OK_NET_ONE_PIN
2964401 SYS_RELIABILITY DEVICE_CONFIG Replace the model parameter 'BV' with 'VR' for Zener diode in config.xml and stress.lib
2895038 SYS_RELIABILITY ELEC_STRESS_S Filtering and sorting pin properties in Electrical Stress settings window is inconsistent
2948201 SYS_RELIABILITY ELEC_STRESS_S System Capture EOS is invoking license selection when running analysis on just this project
2938531 TOPXP ALLEGRO_INTEG Support T-points and constraints for topology extraction flow
2939012 TOPXP AURORA XNet Selection dialog should not allow more than one net or differential pair to be selected
3018180 TOPXP AURORA ilMakeString: Null String warning displayed after closing Topology Workbench
3006512 TOPXP CHANNEL_SIMUL Statistical method in SystemSI returns unusual and mismatched BER eye and eye contour results
3006595 TOPXP CHANNEL_SIMUL Abnormal BER eye and eye height results returned for different cases on using statistical method in SystemSI
2892482 TOPXP COMPLIANCE_KI Topology Workbench SPF+ compliance kit not producing results for specific compliance check items.
3004481 TOPXP COMPLIANCE_KI UCIe compliance kit is not loaded in Topology Workbench
2938536 TOPXP CONSTRAINT_MA Use XY location information from topology file for the Constraint Manager flow
2969867 TOPXP CONSTRAINT_MA Topology Explorer does not update information in Constraints Manager
3034482 TOPXP CONSTRAINT_MA SystemSI ECset CSV export lacks trace spacing/trace width information
2801959 TOPXP GUI Enhance the archive function for max path length limitation
2908769 TOPXP GUI Simplify the path under the ref folder in the archived topology
2941164 TOPXP GUI Topology Workbench: Subcircuit block expands in size on loading an external model (.sp) for the block
2956840 TOPXP GUI Cleanup topology enhancement for SystemPI
2961525 TOPXP GUI Incomplete series switch simulation results on a Windows machine
2971546 TOPXP OPTIMALITY_IN Optimality is not working
2972585 TOPXP OPTIMALITY_IN Topology Explorer Optimality: Errors for lengthy paths and issues with release compatibility
3002212 TOPXP OPTIMALITY_IN Cannot show other results because Optimality user interface is locked in Topology Workbench
2938546 TOPXP SSIVIEWER Add option to launch 2D Curves tab in Topology Workbench
2942901 TOPXP SSIVIEWER Option to Launch 2D Curves tab in SystemSI (new integrated SSIViewer version)
2972368 TOPXP SSIVIEWER Cannot export the aperture width value after deselecting "measure aperture width with each curve" in SystemSI workflow
2934088 TOPXP SYSTEMPI Support Adaptive Frequency Sweep (AFS) for faster impedance extraction of a PDN system with a large SPICE file
2981904 TOPXP SYSTEMPI Issues about spectrum transformation in SystemPI
3009839 TOPXP SYSTEMPI Unable to control simulation name when Spectre is selected for the PDN Impedance workflow
2910522 TOPXP SYSTEMSI LPDDR5X report in Topology Workbench
2922133 TOPXP SYSTEMSI Timing Margin does not consider Min Transmit Setup and Hold
2945782 TOPXP SYSTEMSI Waveform PNG is overwritten and lost on exporting report when there are multiple ranks
2968691 TOPXP SYSTEMSI Value of curve is not recalculated as dB on applying "show Y-axis in log scale"
2989514 TOPXP SYSTEMSI Add "CA Rate" in a Topology Workbench simulation
2994120 TOPXP SYSTEMSI The application stops responding on adding model in the Topology Workbench SystemSI-PBA flow
3035118 TOPXP SYSTEMSI Connectivity error and simulation failure in the SystemSI workflow of Topology Workbench
2899781 TOPXP TCL Enhancement for automatic selection of an available license
2904834 TOPXP TCL Topology Workbench: Stimulus Pattern enhancement
2946217 TOPXP TCL Topology Workbench to support Tcl command to query ports of S-parameter extraction flow
2853727 TOPXP TOPOLOGY_EXPL Unable to delete past simulation results in Topology Workbench
2996062 TOPXP TOPOLOGY_EXPL DA Scripting record/playback issues spanning tools
2713921 TOPXP TRACE_EDITOR Trace Editor enhancements for xhatch reference plane
2901903 TOPXP TRACE_EDITOR Topology Workbench, Trace Editor: Parameters/sweeping details for stack up missing on import
2916959 TRANSLATOR BRD2SPD APD IR drop: The simulation file's opening time has significantly increased after a previous enhancement