PEEPLNK

SOL-28714 iMachining3D || Toolpath || Gouges Target
SOL-28814 Pocket|| Missing arbitration process
SOL-28836 Multi-Depth Drilling || GUI || Allow the same Z-level
SOL-28907 Gcode || HSM || @arc || xmcenter_rel with wrong value
SOL-28987 Cimco Editor 2024 || Gcode as parallel || Wrong behavior and error message
SOL-29039 TC||SC||MachineSim_2023||Fixture machine preview position changed
SOL-29040 Thread Milling || Wrapped Toolpath around Y axis
SOL-29074 Updated Machine || Updated Machine is not updated once fixture position in Setup is changed
SOL-29089 Cimco Editor || General || Installation by modify || Problem with error message
SOL-29120 Operation Sequence Manager || MCO || Non-Cutting Point is not taken properly in the case of Next Tool On Turret
SOL-29128 Machine Simulation || SolidCAM crashes when trying to simulate Balanced Rough operation
SOL-29133 Gcode | MCO | FullTrace | Tool Change - part_tool_tag is 0 if generated alone
SOL-29151 Machine Simulation || Swiss-Type || MCO || Wrong updated machine calculation of X2 and Z2 axes over Citizen
SOL-29235 MCO Cycle || Small graphical issue with Remove parameter option
SOL-28646 Polish Language | SolidCAM Settings | GUI |
SOL-28964 Polish Install | Geodesic Machining |
SOL-28977 Polish Install | Main SolidCAM Setting | GUI Issues|
SOL-29018 TemplateGroup || Tools are loosing its indexes
SOL-29097 GUI || Overlaping elements in Italian version
SOL-29204 Generating Gcode make SC Crash with a MCO cycle
SOL-29243 Turbo HSM not working/ Possible to create hsm operation but not turbo HSM
SOL-29266 GPPL | VMID\Working Style\Trace Output\Output @tool_path_info is output regardless of Yes or No
SOL-29252 Template || Compensation state is not saved when creating new Job template for Chamfer
SOL-29255 2.5D || Compensation is not enabled after convert of the part from SC2022 for operation with Chamfer
SOL-29247 2.5D || Compensation turns itself off in job with chamfer after entering another job